HP is a tech giant that produces and delivers a broad variety of hardware components, software, and related services to consumers, small and medium-sized businesses, and big organizations. This includes customers in the government, health, and education sectors. It is particularly well-known for the extensive variety of printers that it offers.

Unfortunately, while attempting to utilize HP printers, some customers have reported experiencing problems. When using Windows, some users have reported getting the error code 0xc19a0003 when they try to print. In addition to the mistake, a large number of customers received a notification stating that the printhead or ink system had failed. 

There might be an issue with the ink cartridges, the drivers for the HP printer, or something else. However, the HP printer problem may also be caused by underlying system faults, therefore running a repair program will ensure that is not the case. In this article, we will look at “How to fix HP printer error code 0xc19a0003 in Windows?”

Complete Steps How to fix HP printer error code 0xc19a0003 in Windows

Cleaning the Printhead of the Device:

It is possible that the 0xc19a0003 problem with the HP printer is occurring as a direct result of the dirty printhead. You can repair the problem by cleaning the toolbox’s printhead and running the HP Inkjet Utility. Follow the appropriate steps to clean the print head of the device:

Step 1: First, you need to clean the printhead on the toolbox. For this, the “Toolbox” should be opened.

Step 2: After that, select “Printer Services” from the drop-down menu.

Step 3: Select the “Clean Print Heads” option.

Step 4: Take the time to read the directions on the screen, then follow them exactly.

Step 5: Next, launch the “HP Inkjet Utility” program.

Step 6: Once you’ve selected “Clean,” simply follow the on-screen directions.

Verifying the Ink Levels:

Follow the appropriate steps to verify the ink level in the device:

Step 1: Start your computer.

Step 2: After that, activate the printing device that you have from HP.

Step 3: Place a plain sheet of paper in the tray and close the lid.

Step 4: You should see a button next to the word “Setup.” Press it.

Step 5: Now, open “Tools”.

Step 6: To finish, hit the “Ok” button.

Step 7: Select “Estimated Ink Levels” from the drop-down menu on your machine.

Step 8: Tap on “Ok”.

Decluttering HP Printer for Inspecting the Interiors:

This is a basic step in the process of cleaning your HP printer, which involves removing pieces of it to check its internals. The HP printer error number 0xc19a0003 may occur if there are any interfering particles in the printer. It is necessary to remove the tray, as well as the power cord and the wires, in order to declutter it. To avoid damaging your HP printer, be on the lookout for anything that could get caught in the moving parts, such as paper fragments, rolled paper, or other foreign things. 

Step 1: Firstly, make sure your HP printer is turned on.

Step 2: Then, pull out its tray.

Step 3: You may remove all the paper sheets from the tray by removing them from the tray one by one.

Step 4: Check to see whether any of the paper has been rolled inside. Remove it gently if you find it.

Step 5: Remove all of the paper that is embedded in the device.

Step 6: In addition, be sure that your printer does not include any unusual components.

Step 7: In order to move to the next step, the power cable must be disconnected.

Step 8: Remove any cords that are attached to your HP printer as well.

Step 9: Then, make sure there are no fragments of paper or other debris in the printer’s mechanism.

Step 10: Now, lift the duplexer to check that nothing is caught in this location by making sure there is nothing underneath it.

Step 11: After that, the power cord and all of the other wires must be attached to the computer.

Step 12: Before using the printer, allow it to get to operating temperature first.

Step 13: The final step is to print a test image to confirm it’s working.